Some requirements for correct use of peanut shelling machine

Peanut shelling machine, as its name implies, is a kind of machinery for removing peanut shells. There are certain specifications and requirements for the use of any machinery, and peanut shelling machine is no exception. So what are the requirements for the correct use of peanut sheller?

1. Requirements for peanut shelling machine.

The machine should be hulled cleanly and with high productivity, and the sheller with cleaning device should be selected, which also requires high cleanliness; Simple structure, reliable use and convenient adjustment; Low loss rate, small breakage rate; Low power consumption, certain versatility, except peanuts, should be suitable for hulling other crops, in order to improve the utilization rate of the machine.

 

2. Requirements for peanuts.

Peanuts should not be too wet or too dry, if they are too dry, the crushing rate will be high. If too wet, the work efficiency would be low. The following methods can be used to make wet and dry conditions suitable: 1). Shelling in winter. Before shelling, evenly spray about 10 kilograms of warm water on 50 kilograms of peanuts, and cover them with plastic film for about 10 hours (The plastic film covering time is 6 hours in other seasons), and then it can be shelled by drying in the sun for about 1 hour.

2). Soak the dried peanuts in water, take them out immediately after soaking, cover them with plastic film for about 1 day, and then dry them in the sun, and then shell them when they are not too dry or too wet.

3. Requirements for voltage and workplace.

Single-phase motor should work normally, and its voltage should reach its rated voltage. In order to prevent the workplace from being too far away from the transformer and the voltage is insufficient, it is best to choose a place near the transformer in the workplace.

Proper use of peanut shelling machine can not only prolong the service life of peanut sheller, but also ensure the production efficiency of peanut shelling machine, so it is necessary to operate the machine strictly according to the requirements!

Development history of peanut sheller machine
The structure of scraper peanut shelling machine
Customer from Senegal purchased the peanut sheller and peanut sieving machine
One of the vulnerable parts of peanut shelling machine: rotor
Factory direct small peanut shelling machine
Peanut machinery mechanization in Zhengyang country is accelerated