The maintenance of the peanut sheller

With the wide application of peanut machinery, peanut sheller has been widely used in many countries around the world. As the professional equipment for shelling peanut, peanut sheller greatly improves the working efficiency of the production. However, a lot of users give too little care to the maintenance of peanut sheller, which causes the decrease in mechanical efficiency indirectly and affect the economic benefit of factories seriously. The following is an introduction of the maintenance of the peanut sheller:

 

1, The peanut sheller adopts triangle belt transmission. New belt would be stretched and get loose gradually due to the tension after using for a period of time. Adjustment should be made according to the situation.
2, The bearing of peanut sheller should be checked timely. Once wear or oil starvation is found, refueling or replacing of the bearing should be made timely.
3, The temperature of the motor can't be more than 60 degrees Celsius and the temperature of the bearing should not be more than 25 degrees Celsius. Once excessive temperature is found, the operator should find out the reason timely and eliminate it.

4, When using the peanut sheller, the operator should often pay attention to the working condition of each part and check the bolt looseness of each part. Tighten the bolt at any time if it is loose. Special attention should be paid to the parts with high rotation speed, such as the upper and lower fan blade, especially the lower one. Note whether there is wear or fracture in the lower fan blade and whether there is wear or deformation in the external reinforcement plate of blade. Once problem is found, the operator should make timely repair or replacement; the hoisting shaft of sorting sieve and the joint of eccentric shaft and sorting sieve should be checked carefully.
5, Cleaning of the bottom of the sieve: the sieve bottom holes of the peanut sheller should be cleaned regularly with a wire brush. Once the sieve bottom hole is blocked, the kernels and peanut would be mixed on the sieve and the discharging of kernels would be slow as well. As a result, the kernels would flow in direction of small fruit into the secondary work warehouse, which would increase the breakage rate of peanut kernels. The bottom of the sieve in stoning machine need to be cleaned regularly as well.
6, At the end of the processing season, major inspection should be made for the peanut sheller. First, check the operation and wear condition of the drum shaft, eccentric shaft and fan shaft; then, check whether there is deformation or crack on the bottom of the screen; check the wear of sorting sieve at last. After the inspection, the operator should repair the damaged parts, remove dirt and residues in the peanut sheller, tighten all the bolts, oil all the bearings, remove the belt and put the accessories in storage for the use of another season.

Above is a simple introduction of how to maintain the peanut sheller machine, we hope it helpful for you. If you have any need for our products, welcome to contact us. We would meet your needs with excellent services.

Temperature requirements of parts of peanut shelling machine when working
Maintenance of Bk-700 peanut sheller
Methods of application and precautions
The structure of scraper peanut shelling machine
Development history of peanut sheller machine
The working process of peanut shelling machine
Adjustment in the operation of peanut shelling machine